Oled shield based on 2.54" display and ESP32. The display is used by **QG-2864KSWNG01** based on the **SPD0301 **controller (similar to SSD1306). ESP32 "Fire Bittle" is used as the base board.
You can view the project on the YouTube channel: [https://www.youtube.com/watch?v=grxiBRuwqGc](https://www.youtube.com/watch?v=grxiBRuwqGc)
Oled шилд на базе 2.54" дисплея и ESP32. Дисплей используется **QG...
This is a Raspberry Pi Zero W hat/shield with USB MIDI input, stereo audio output, 3 user-configurable buttons and OLED display.
To use as an audio card, enable PWM audio output by adding `dtoverlay=pwm-2chan,pin=18,func=2,pin2=13,func2=4` at the end of *config.txt* file.
Remeber that HDMI audio output is the default; use `raspi-config` to force output to 3.5mm audio jack.
If you can't find 47uF...
This is my atmega8 (and ATmega328 compatible) development board.
As it has the uart connector, you can program it in the arduino ide, if you are into that. You just need to download the bootloader through isp programming.
(I personally prefer to do it the expert way)
I added some connectors according to what I usually use:
I2C (also pull ups)
SPI (with an extra pin for devices such as nrf24,...