TinyRemoteRF is an RF remote control based on an ATtiny13A microcontroller and a SYN115 ASK transmitter IC powered by a CR2032 coin cell battery.
- Firmware (Github): https://github.com/wagiminator/ATtiny13-TinyRemoteRF
The wiring is shown below:
Tube Based Amateur HF / Shortwave Transmitter Project
Similar to the Pine Board Project by Bob Heil.
Untested. Use at own risk.
MySensors Standard Board
Arduino Pro Mini + NRF24L01+
2 Sensor inputs
10 pin expansion header for connecting an expansion board(to be made)
The expansion board will have 4 extra digital inputs/outputs and 2 Analog inputs
2.4 GHz Arduino-based radio control equipment for RC toys. RF module - NRF24L01+ PA LNA.
With feedback. Sticks form PS4.
Аппаратура радиоуправления на Ardunio и NRF24L01
so, I'm working on a project and decided it would be nice to have a small pcb for me to work on the communication between two atmega microcontrollers.
I designed as a very small development board with a UART connector to debug the RF24 communication but also so the whole board can be used as a shield, after.
My intentions are that, after I manage the RF stuff, I can use the board to input data...