TinyRemote is a 5-button IR remote control based on an ATtiny13A powered by a CR2032 or LIR2032 coin cell battery.
- Project Video (YouTube): https://youtu.be/ad3eyNCov9c
- Firmware (Github): https://github.com/wagiminator/ATtiny13-TinyRemote
For the 12-button versi...
TinyRemoteXL is a 12-button IR remote control based on an ATtiny13A powered by a CR2032 or LIR2032 coin cell battery.
- Firmware (Github): https://github.com/wagiminator/ATtiny13-TinyRemoteXL
TinyPlayer is an IR remote controlled and LiPo battery powered MP3 player based on ATtiny13A and DFPlayerMini module. The DFPlayer module is controlled via a simple cycle-precise software implementation of the UART protocol (8N1, 9600 BAUD) in half-duplex mode. The volume last set as well as the track number last played are saved in the EEPROM and automatically loaded the next time it i...
## Infrared (IR) Remote ##
Here's the pinout for almost every 3-pin IR Receiver:
(Above): a diagram of connecting the receiver to an Arduino.
There are many different manufacturers of IR Receivers and some have different pinouts:
Image courtesy of Alberto Piganti. See: http://www.pighixxx.com/
There is also an easy-to-connect IR Receiver Electronic Brick l...
IR RBG LED Strip Arduino Controller
Full build and instructions on [Youtube Video] or [Instructables.com]
THIS IS A SIMPLE ARDUINO IR HOME AUTOMATION SYSTEM IN WHICH IT CAN ACTIVATE OR DEACTIVATE 2 RELAYS INDUVIDUALLY OR SEPERATELY.
THE IR REMOTE USED FOR THIS PROJECT HAS A RANGE OF 8m BUT THE NAME AND DETAILS ARE NOT SPECIFIED. SO I FOUND A PICTURE OF IT ON THE INTERNET SO U CAN SEE WHICH ONE IT IS [IR REMOTE FOR ARDUINO](https://www.google.com/search?q=arduino+ir+remote&source=lnms&tbm=isch&sa=X&ve...