This is a VGA and PS/2 breakout board in featherwing format. Can be used with ESP32 FabGL library.
I have only tested it briefly and it seems to work just fine.
FabGL settings for 64_COLORS:
#define VGA_RED1 GPIO_NUM_23
#define VGA_RED0 GPIO_NUM_22
#define VGA_GREEN1 GPIO_NUM_14
#define VGA_GREEN0 GPIO_NUM_32
#define VGA_BLUE1 GPIO_NUM_15
#define VGA_BLUE0 GP...
4 steppers direct ESP32 GPIO and 2 via I2S shift register
shift register PWM for 4 mosfet, 4 servo outputs
mixed voltage: two power rails
current and voltage monitor for two power rails and IC power
all parts available through lscs.com
I2C OLED and output for TFT+touch
A wireless high-speed ArtNet/DMX bridge for the contest at https://jlcpcb.com
It receives ArtNet DMX data via TCP/IP and transmits DMX data nad control data for NeoPixel / WS2812 / WS2811 LEDs.
It can also act as a slave device with LEDs in 802.11LR mode (esp32 specific long rang mode)
* 802.11LR ArtNet Node & ArtNet Master
* Approx. 100-200 FPS
* Over-the-Air Updates
* Powered by 5V