# Multi purpous PWM led driver #
WiFi PWM Led driver light hub for white, warm white, rgb etc use (8 chanels).
Connects to home automation system (for exemple Jeedom).
This drives series/parallel led strips, not adressable leds / led strips.
2 PCB designs to be able to mount it in round or rectangular enclosures.
# A ESP32 ad-on board/shield for controlling multiple IO's #
Digital inputs via 1-Wire connexion
4 relay outputs, 5 mosfet outputs (12/24V).
I personal use it to control central heating and warm water production using a single mid temperature (55°C) heatpump.
Arduino code generated by Jeeduino plugin in Jeedom home automation system.
# ESP8266 I/O shield #
Main board for inputs and outputs multi IO for for exemple central heating system with FET outputs, relais outputs and 1-wire connection.
Need an ESP 8266 devboard.
On board 5V and 3.3V from 12 to 24V input.
Used this before making the one with ESP32 and more I/O and calculation power.
Works fine for many uses.
ESP code generated by Jeeduino plugin in Jeedom but you may...
4 230 V inputs to monitor togle relais. Let you know if light is on or off and togle them witha domestic automationsystem.
Tested on Arduino and ESP32 board. May install a cap to filter 50/100 Hz or do it by soft (20 mS timer for on/of)
A 1-wire variant will be comming soon.
4 entrées 230 V isolées par optocoupleur pour permettre de voir l'état d'un télérupteur (lumière allumée ou éteinte) puis...