This is a almost exact copy of the TP4056. The only difference is that this board has a better protection IC. Basicly it has a better protection sistem.
The TP4056 module is made for charging rechargeable lithium batteries using the constant-current/constant-voltage (CC/CV) charging method. In addition to safely charging a lithium battery the module also provides necessary protection required by...
Li-Ion battery charger, protector and 5V/2A booster. Use unprotected Li-Ion batteries which are rated for a discharge current of at least 5A !
A quad 18650 Lithium Battery charger module based on the improved TP4056X IC.
I made this module because all the ones on Ebay are dodgy as fcuk. Also I needed to charge four batteries at once without burning down my house.
YouTube video or model (older revision):
5V 2.1A High efficiency LiIon/LiPo UPS module developed for regular usage in home automation IoT server SoC based devices with 5V 2A power supply. Also can be used forpowering up any arduino like project with same supply voltage.
This is the second version of my TP4056 based lithium battery charger module.
In v1.xx i used a linear voltage regulator (LM7805CV) which got very hot and limited the potential of the module a lot.
In v2.10 i replaced LM7805 with a switching counterpart (XL2011) which resolves most of the input issues allowing for a full range of 5V (via USB) and from 8-45V via the screw terminal or DC-Jack.
# 18650 Charger & Regulator
Low-cost 4-cell 18650 charger use TP4056 charger modules, each output of the TP4056 modules can be connected to MT3608 and/or LDO (HT73xx/HT78xx) to get a regulated voltage.
Voltage and current checkpoints are provided to easily monitor the voltage and current of each battery, a 2.45mm slide switch can be soldered on the current checkpoint.
Furthermore, it is fairly...
# **CHICKEN COOP AUTOMATIC DOOR** #
*Status : working final appliance 01/03/2020*
*Sorry for my following english language (En français plus bas)*
- Energy self-sufficient, solar panel charge battery with TP4056 and systeme is low-power managment
- Check luminosity with solar panel and open or close the door (no RTC)
- Geared-Motor AC is drived with specific H MOSFET bridge IC