Shield to use the module WTV020-SD 16P with Arduino.
For more information see [https://www.adrirobot.it/wtv020-sd-shield-costruzione/](https://www.adrirobot.it/wtv020-sd-shield-costruzione/)
<div>To test the series of sensors contained in the package "37 in 1 Sensor Module Board Set" which is sold by many sites it is possible to use this shield compatible with Arduino UNO original R3 and related clones.</div>
<div>On the board are available many connectors that are already properly connected with the digital or analog ports of Arduino.</div>
<div>In fact, the card, in addition t...
If you have a Wemos D1 mini card and you want to test the series of sensors contained in the package "37 in 1 Sensor Module Board Set" which is sold by many sites you can use this shield.
On the shield are available many connectors that are already properly connected with the digital or analog ports of the Wemos D1 mini card. On the board there is also already a power supply stage that allows powe...
Carrier board for Arduino PRO Portenta H7.
To be used for developpment purpose.
Allow easy access to all 110 pins via connectors.
Enable Portenta H7 to be interfaced with traditionnal Arduino UNO shields
Description page on github : [https://github.com/Rufus31415/arduino-pro-portenta-h7-carrier-board](https://github.com/Rufus31415/arduino-pro-portenta-h7-carrier-board)
This shield is designed for easy powering and using two GPIOs of ESP-01/01S module. It is powered by 5 volts DC and has four 3-pin screw terminals for connecting some periphery like 2812 LEDs, relay modules, etc. Also it has a 3.3v power supply on board
<div>Sheld for Arduino with an H-bridge L293D which allows to drive two DC motors <a href="http://www.adrirobot.it/arduino/shield_l293/arduino_shield_l293.htm">Sheld L293D</a></div>
<div><strong>Prototype of the shield</strong></div>
<div><img src="//image.easyeda.com/pullimage/CF2Pgn94YzW8taFhFbZa2j0KgoAptmO0UNYJkNdD.jpeg" alt="" width="276" height="207" /></div>
A simple ethernet shield for Wemos D1 Mini based on W5500 respecting WizNet directives (https://wizwiki.net/wiki/doku.php/products:w5500:start).
All SMD components are chosen such that JLCPCB can mount them. The only exception is the crystal; replace it with X322525MOB4SI (adapting both schematic and layout) if you want it mounted.
Since JLCPCB can mount either top or bottom only, all the SMD co...
Un Escudo para Arduino UNO para el juego de memorizar colores "SIMON"
A collection of protoboard designs, all ready-to-order via your favourite PCB manufacturer.
Boards in the collection:
- Breadboard-compatible - all with power rails on both sides as well as extra holes and pads for connecting power:
- Small (15 rows of 2x5 points)
- Medium (30 rows of 2x5 points)
- Large (60 rows of 2x5 points) in two variants: a) with continuous power rails, b) with...
Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice