TinyRemote is a 5-button IR remote control based on an ATtiny13A powered by a CR2032 or LIR2032 coin cell battery.
- Project Video (YouTube): https://youtu.be/ad3eyNCov9c
- Firmware (Github): https://github.com/wagiminator/ATtiny13-TinyRemote
For the 12-button versi...
TinyRemoteRF is an RF remote control based on an ATtiny13A microcontroller and a SYN115 ASK transmitter IC powered by a CR2032 coin cell battery.
- Firmware (Github): https://github.com/wagiminator/ATtiny13-TinyRemoteRF
The wiring is shown below:
Arduino Mega ADK based project to allow remote control of computer's power state (IPMI style working with any computer).
GitHub Repository : [https://github.com/karnalta/KNPowerManager](https://github.com/karnalta/KNPowerManager)
TinyRemoteXL is a 12-button IR remote control based on an ATtiny13A powered by a CR2032 or LIR2032 coin cell battery.
- Firmware (Github): https://github.com/wagiminator/ATtiny13-TinyRemoteXL
A smart power saving in line power switch designed to remove mains power from a TV or other device in standby to reduce electric cost.
This design uses any infra-red controller with a 36 - 38kHz carrier. A long press of any IR button on the users remote controll will cut the mains power, a short press on any button will restore the mains power.
An override button is also on the power switch to s...
## Infrared (IR) Remote ##
Here's the pinout for almost every 3-pin IR Receiver:
(Above): a diagram of connecting the receiver to an Arduino.
There are many different manufacturers of IR Receivers and some have different pinouts:
Image courtesy of Alberto Piganti. See: http://www.pighixxx.com/
There is also an easy-to-connect IR Receiver Electronic Brick l...