2.4 GHz Arduino-based radio control equipment for RC toys. RF module - NRF24L01+ PA LNA.
With feedback. Sticks form PS4.
Аппаратура радиоуправления на Ardunio и NRF24L01
<p>Simple board to control hotwheels car via bluetooth using an attiny84 and a dual motor driver.</p>
<p>You can use this board with one brushed motor on throttle and another brushed motor with a linear pontentiometer as a servo to steering.</p>
<p>Also, if you want to use "tank-mode" (where each motor controls a track), you can ommit the linear potentiometer input and...
# I2C Controlled 2S-4S Brushless ESC
* *Five Via-In-Pad Myths*
* At first I was reluctant to have vias in the pads. This paper explains the do's and don'ts
CGScale project for ESP8266 module with HX711 and load cells. Schematic is based on nightflyer88 project found at https://github.com/nightflyer88/CG_scale.
This PCB uses the green HX711 modules together with a Wemos D1 Mini controller