**Port breakout board for the generic STM32 'Blue Pill' development boards**
*May also support Red/Black Pill boards where pinout/size is compatible with the Blue Pill board.*
HS101-PRO is an upgrated version of the HS101 DIY Oscilloscope that joins the portability of an Android oscilloscope with advanced hardware features. The build require some experience with SMT mounting so approachable just from part of the DIY community. Within its specs, all the standard oscilloscope applications are possible with this device.
Bluepill-serial-monster is a STM32 Blue Pill board that turns it into triple USB-to-Serial adapters.
The board implements a USB 2.0 full-speed composite device that consists of 3 USB CDC devices.
STM32 Blue Pill is a ridiculously cheap STM32 development board which is available in many stores around the globe. The board contains decent hardware that supports USB 2.0 Full-Speed, has 3 independent...
Shield for blue-pill compatible boards.
Allows to connect a second blue-pill as ST-LINK.
May use with blue-pill compatible boards on stm32f401 or stm32f411 (black-pill). For example see https://msalamon.pl/pogromca-bluepill-nadchodzi-nowe-czyli-blackpill-z-stm32f4/
Schematic to test CAN bus (Controller area network) between Jetson TX2 and STM32.
Setting up the Controller Area Network (CAN) at: [https://lince-facens.github.io/mobilelab/setting-up/can-bus/](https://lince-facens.github.io/mobilelab/setting-up/can-bus/)